Craig Hopkins walks you through the body work stage of prepping for plastic fillers on his rebuilt 1967 Chevy Chevelle. Learn everything you need to know about the fillers as well as the body files. See what products work best for this process and find out how to use each of them correctly. Also, learn how important it is to use grease and wax remover on the car before you begin the body work stage. Use these helpful tips today and start fixing your classic car!
You Might Also Enjoy
-
5:18Project Car Buying Advice
Buying a car to restore may not be as stressful as looking for a new project car, but there are still important aspects to look for. Brent Ackley tells you what areas to examine to get the finished product you desire depending on how much money you want to spend and the amount of time…
Watch Now >> -
1:28Sheet Metal Shrinker/Stretcher For Your Classic Car
A sheet metal shrinker/stretcher is perfect for any type of metal fabrication you need for your classic car, and it keeps the metal completely flat (without crimps). Mark Oja gives a brief demonstration on how the stretcher works and then shows you an example of a finished product.
Watch Now >> -
9:32Classic Car Quarter Panel Final and Welding
Craig Hopkins runs down a checklist on how a car quarter panel should fit on your classic car, including using plenty of clamps and securing it with a final welding and rock grinder to level it out for a perfect repair.
Watch Now >> -
8:49How to Sand a Car: DA Sanding
Craig Hopkins demonstrates how to sand a car fender using a small, tight orbit DA with a cushion pad. This allows for a nice flow rate that makes the sanding really smooth and gives the classic car a clean finish. Make sure to be just as careful Craig when sanding around the edges so you…
Watch Now >>
