There is a certain procedure to follow when you set the side glass in the car. The factory assembly manual helps a lot. Learn tips as you watch Craig Hopkins set the car side glass. He also demonstrates the installation of the door panel, armrest, door handle and window crank. Lastly, he installs the sill plate. Each step is getting the car closer to the body drop.
You Might Also Enjoy...
-
4:08Classic Car Restoration: Setting the Dwell
Classic Car restoration is an exciting and hard working project. In this video, Brent Ackley shows you how to approximately position the points on a classic car’s engine, safely use the dwell meter and adjust the points for the perfect distance. One of the techniques can be done individually while the other needs a partner.
Watch Now >> -
3:59Putting Spark Plugs Back Into the Engine
George Vondriska and Brent Ackley explain how to put spark plugs back into the engine by finding the correct gap and gapping the plug. They also cover the diagnostics of a spark plug before putting it back into your classic car. They give multiple examples of bad spark plugs, discuss what is wrong with them…
Watch Now >> -
3:30Final Inspection of Your Classic Car Repairs
To conclude the repairs made on Brent Ackley’s 1966 Buick Skylark, he and George Vondriska need to make a final inspection. They briefly cover everything under the hood from the direction of the gas filter to the transparency of the air cleaner to proper heater and radiator hoses. They’ll help you make sure the general condition…
Watch Now >> -
4:06Repelling Water with Ceramic Glass Coating
Mike Phillips of Autogeek.com stops by the garage to visit Dennis Gage and demonstrate some great new ceramic glass coating that is designed to repel water. As with any surface enhancement product, its success depends on the correct preparation. Phillips demonstrates how to machine prepare the surface of the glass to achieve a surgically clean…
Watch Now >>
