A common problem when buffing out classic cars is wearing down the edges of the panels. Mark Simpson explains how to make this type of car panel painting repair, from surface preparation to masking tips to applying a new finish. Knowing what to do and the proper steps to take will make these types of repairs blend in perfectly.
You Might Also Enjoy
-
15:42Customize Your Own Classic Car With Sheet Metal Fabrication
In this video, learn how to customize your own classic car! Sheet Metal Fabrication can be a useful and effective tool when you are looking to add customized exterior to your classic car. Mark Oja works on a rare, custom Blown Fiat and adds his own custom hood using sheet metal fabrication made from cheap…
Watch Now >> -
1:04How to Sharpen a Chisel
Craig Hopkins teaches you how to sharpen a chisel on a bench grinder with ease in this video. To get a single edge chisel, you simply lay it on the stone and create a sharp edge and a cup.
Watch Now >> -
18:30How to Sand a Car: Hand Sanding
Craig Hopkins explains how to sand a car with a paint stick around the edges without making a flat spot. He uses the water blade to distinguish where to sand more and where not to over sand. You will get an up close look on how to properly sand every difficult area, crease, and edge.
Watch Now >> -
3:30Trial Fitting on the Classic Car Quarter Panel
Since you will butt weld the new quarter panel to the roof and existing quarter panel, Craig Hopkins teaches you how to remove a quarter of an inch from the roof without cutting through the existing car quarter panel. Then, he’ll apply some weld through primer to the step you just created and rest the…
Watch Now >>
